Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
mt helmet carbon fiber
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Address：No. 3888, Hutai Road, Baoshan District, Shanghai, China
Manufacture date,. The ,date, of ,manufacture, will be found on the ,helmet, as a permanent marking, as required by EN 397. It is usually given as a quarter and year, and is often on the bottom of the peak. This marking can take different forms e.g. dials with arrows, dots for the quarter and a year etc.
Field tests have shown ,helmet, shells last for three years from issue ,date,. Components of harnesses may deteriorate more rapidly and may need to be replaced. Do hard hats have a use-by ,date,? No, however it’s a good idea to record the ,date, of issue by writing on the inside of the hat with a marker and replacing the hat every two or three years.
Arai recommend replacing your ,helmet, 7 years after ,date, of ,manufacture, and 5 years after ,date, of purchase to maintain the maximum levels of protection. The EPS liner is effectively the shock absorber of your ,helmet,, absorbing the force of an impact onto the shell.
8/5/2009, · All ,Safety Helmets, are marked with a ,date, indicating when they need to be replaced, normally such markings are on the underside of the peak and consist of months in a circle and an arrow pointing at the relevant month with the year recorded in the centre. ,Safety Helmets, also need to be changed when damaged, when they have been
points to 9 and the number is 04 means that the helmet was manufactured in September 2004. If the helmet has been used regularly it should be replaced after 3 years from the date of issue. The date of issue should be marked on an additional sticker on the inside of the helmet at the back of the shell. The date of issue is not necessarily
The Occupational ,Safety, and Health Administration (OSHA) guidelines for head protection are referenced in 29 Code of Federal Regulations (CFR) 1910.135 and 1926.100. Occupational Hard Hats 29 CFR 1910.135(a)(1) states, "Each affected employee shall wear protective ,helmets, when working in areas where there is a potential for injury to the head from falling objects."
50+ ,Safety Helmet, Expiration ,Date, Images.The stamp is as easy to read as a. I don't think there is one — but most ,helmets, have a manufacturer's info plate or sticker on or inside them indicating the maker & ,date, of ,manufacture, … the important, or at least more important thing to look fo.
the ,date, of ,manufacture, [shell injection], not the actual starting ,date, of use, as the period between manufacturing and actual distribution to the worker can greatly vary. ,Date, of first use, must be written onto the first-use-sticker, which is co-supplied with each ,helmet,, at first handing over and placed into the ,helmet, shell. 06-990.1 NL-GB/10.12